Unwind-Max unwind dia.700mm; Air expanding mandrel 3"
Web guide-Maxcess Web guide ( Edge position control )
Flat bed die cutting-Eye mark sensor, height of the blade 9.5mm ( with upper blade and the bottom blade )
Rewind-Single rewind, Max unwind dia.700mm; Air expanding mandrel 3"
Waste matrix-Max unwind dia.600mm; Air expanding mandrel 3"
|
NO. |
Purchase Items included in the offer |
UNIT |
|
1 |
Unwind-Max unwind dia.700mm; Air expanding mandrel 3" |
1 |
|
2 |
Web guide-Maxcess Web guide ( Edge position control ) |
1 |
|
3 |
Flat bed die cutting-Eye mark sensor, height of the blade 9.5mm ( with upper blade and the bottom blade ) |
1 |
|
4 |
Rewind-Single rewind, Max unwind dia.700mm; Air expanding mandrel 3" |
1 |
|
5 |
Waste matrix-Max unwind dia.600mm; Air expanding mandrel 3" |
1 |
Parameter:
|
1 |
Max Speed |
400 repeats/min |
|
2 |
Accuracy of Cutting |
±0.15mm |
|
3 |
Max Machine Web Width |
330mm |
|
4 |
Min slitting max-width='100%' width (Option) |
16mm |
|
5 |
Max Unwinding Dia. |
φ700mm |
|
6 |
Max Rewinding Dia. |
Φ700mm |
|
7 |
Total Machine Consumable |
14KW |
|
8 |
Overall Diameter(L×W×H) |
2700mm×1300mm×1500mm |
|
9 |
Weight |
3000KG |
|
10 |
Power Supply |
AV,380V,50HZ |
|
11 |
Air Supply |
0.4~0.6 MPa |
Web Path:
It uses an accurate rotary die-cutting system and performs material conversion through micro-control. Die cutting, waste rewinding and finished product rewinding are all in one process. Main control PLC and man-machine interface, with functions such as edge detection and watch detection. The cutting system uses magnetic powder clutch and magnetic powder brake to control the synchronization of cutter and die cutting. Separate waste motor control.
1. Mother reel end photocell with automatic stop. 2. Full rotary flexo printing module support sport varnishing/cold foil 3. Die cut unit able to work full rotary mode and semi rotary mode. 4. Precision cutting to reduce waste
The double-unit trademark die-cutting and hot stamping machine adopts a synchronous transmission mechanism to realize the synchronous movement of the two molding units. A closed transmission chain is used to drive the gripper row to transfer the paper to two molding units in turn to achieve hot stamping, creasing or die cutting processes.
Bienvenida a nuestra página web. Podría contacto con nosotros en inglés por los siguientes métodos en cualquier momento, le repondríamos antes posible para proporcionar los services adecuados.
Please feel free to leave us a message, We will always pay attention to your inquiry and inquiry.
Copyright ? Ruian Maoyuan Machine Co.,Ltd. All Rights Reserved. 
